SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Parts
Used Forklift Parts - In due course, lift truck components would wear and need to be replaced. Obtaining brand new components can become a costly undertaking so another idea is to acquire used forklift parts. This could save much cash eventually. It is a great idea to acquire used lift truck components which have been reproduced. These parts would guarantee that you are getting parts which will work for a long time and be productive.
Remanufacturing broken and worn out parts is a more cost effective method in general as opposed to rebuilding. With rebuilding parts, just the parts which are worn out or broken get replaced, which means that other wearable parts can break down soon after purchase.
Remanufacturing however offers the best guarantee for second-hand parts. Remanufactured parts are taken apart and cleaned and then all wearable pieces are changed. All wearable parts are replaced regardless of age or wear which is another rationale why reproduced components on the whole run so much better. Whichever component within the part is new and this provides much longer life to the used part. Based on the forklift components which are being redone, the cleaning process and the entire remanufacturing process would vary.
After complete disassembly, the engines are oven cleaned. Several parts of the engine like for example pistons, spark plugs, rings, valve springs, filters, and valves can be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no noise, no oil pressure problems, no leaks or any vacuum.
Transmissions are one more item that is oven cleaned after being disassembled. The transmission is then pressure washed. A comprehensive inspection is done so as to check for any cracks. Bushings, seals and bearings are all replaced. Usually, the replacement parts used on transmission components meet OEM specifications.
Some lift truck parts like the alternator, the water pump, torque converters, the starter and steer axles can be quite serviceable after worn parts are replaced. The electronic control in the electric lift truck is maintained by the control card. This card can also be remanufactured with replacing all aged and worn out parts. Unlike various forklift components the control card can only have the worn and aged components replaced.
Components that are reproduced have to be thoroughly checked upon reassembly to guarantee they are in good condition prior to being sold. When buying these parts, it is a good idea to be sure that they have undergone all of the proper testing and inspections. On certain larger parts like for example transmissions, steer axles and engines, OEM specification replacement components should be utilized.
The dealer of used forklifts and components could guarantee that the remanufactured parts have met OEM specifications and that these parts meet industry standards. Lots of details go into remanufacturing used components. This attention to detail offers more serviceability out of reproduced components than the components that were only rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Prince Albert, Saskatchewan
forkliftpartsprincealbert.ca
Email Us
About Us